give us a call:
High frequency setting accuracy over the entire operating range
Calibrated output based on the RMS voltage and signal span
High frequency resolution (5 decimal places at an initial sampling rate of 0.1 Hz)
The waveform sinusoidal, meander, Triangular,
sawtooth, (straight, reverse), offset, rectangular (TTL)
Frequency range from 0.1 Hz to 2 MHz
Frequency setting ±0.05%
Frequency instability ±0.02% in 15 min
The signal amplitude is sinusoidal ±5 V at a load of 600 Ω
forms ±10 V without load
Signal span: meander, triangular, ±10 V at 600 Ω load
sawtooth (straight, reverse) ±20 V without load
Output signal level adjustment
limits:
- sinusoidal form from 4 mV to 3.7 V (scz) at a load of 600 Ω
from 8 mV to 7.4 V (scz) without load
- meander, triangular, sawtooth from 10 mV to 10.465 V (span) at a load of 600 Ω
forms: 20 mV to 20.93 V (span) without load
Signal level unevenness ±5% at frequencies from 0.1 to 10 Hz
sinusoidal shape relative to ±2% at frequencies from 10 Hz to 200 kHz
1 kHz ±5% at frequencies from 200 kHz to 2 MHz
The harmonic coefficient of the sinusoidal ±0.2% at frequencies from 10 to 100 Hz
Forms ±0.07% at frequencies from 100 Hz to 10 kHz
±2% at frequencies from 10 to 120 kHz
±1% at frequencies from 120 kHz to 1 MHz
±4% at frequencies from 1 to 2 MHz
Parameters of the rectangular (TTL) signal log. «1» ≥ 2.4 V; log. «0» ≤ 0.4 V the
form duration of the front, the cutoff is not more than 100 ns
in the frequency range from 0.1 Hz to 2 MHz
Operating temperature range from minus 10 °C to + 40 °C
Power Supply ~230 V, 50 Hz; 10 V∙A
Dimensions; weight 210×71×255 mm; 2 kg
Подробнее
