give us a call:
High frequency setting accuracy over the entire operating range
Calibrated output based on the RMS voltage value
Bit-by-bit frequency and level control with encoders
The waveform is sinusoidal, rectangular (TTL)
Frequency range from 2 Hz to 2 MHz
Frequency setting error ±0.05%
Frequency instability ±0.02% in 15 min
Signal amplitude ±5 V on load 600 Ω
±10 V without load
Limits for adjusting the output signal level from 1 mV to 3.75 V (scz) at a load of 600 Ω
from 2 mV to 7.5 V (scz) without load
Signal level unevenness ±2% at frequencies from 20 Hz to 200 kHz
relative to 1 kHz ±5 % at frequencies from 200 kHz to 2 MHz
Harmonic coefficient ±0.3% at frequencies from 2 to 20 Hz
±0.2% at frequencies from 20 Hz to 100 kHz
±1% at frequencies from 100 kHz to 2 MHz
Parameters of the rectangular (TTL) signal form log. «1» ≥ 2.4 V; log. «0» ≤ 0.4 V the
duration of the front, the cut-off is not more than 100 ns
Operating temperature range from minus 10 °C to +40 °C
Power Supply ~230 V, 50 Hz; 10 V∙A
Dimensions; weight 210×71×255 mm; 2 kg
Подробнее
